Custom Power Supplies
Custom Industrial Power Supplies


200 Watt High Temp Industrial Power Supply - Click Here for PDF Version

Product Description

200 Watt Low Profile Industrial Power SupplyThis 200 watt, single output, high temp, low profile, ac to dc power supply is designed for applications requiring a small profile which can operate in an extreme environment.  This 200 watt high temperature ac to dc power supply can operate without airflow. The operating temperature range is -40° to +85° C (baseplate).

Features

  • Very Low Profile: 0.5”
  • Operating Temperature Range: -40º to +85º C (Baseplate)
  • Standard Full Prick Footprint: 0.5” x 2.4” x 4.6”
  • High Efficiency: ~91%
  • UL60950-1, CSA60950-1 (cUL), EN60950-1, & CE (LVD)
AC Input
  • Voltage Input Range: 90-264VAC (nominal range)
  • Frequency: 47-440Hz
  • Phase: Single Phase, 2 wire plus ground
  • Inrush Current: <40A  (Cold Start at 200Vac)
  • Power Factor Correction: .95 minimum, meets EN61000-3-2
  • Start-Up Time: <500mSec (Output within regulation)
  • Input Surge Voltage: Input transient suppression circuitry to protect power supply from permanent damage.

Output Selection Guide

Model #:

Voltage

Max Current

Regulation

Ripple

HTIPS200-3.3

3.3Vdc

25 Amps

±3%

50mV pk-pk

HTIPS200-5

5.0Vdc

25 Amps

±3%

50mV pk-pk

HTIPS200-9

9.0Vdc

22 Amps

±1%

120mV pk-pk

HTIPS200-12

12Vdc

16.6 Amps

±1%

120mV pk-pk

HTIPS200-15

15Vdc

13.3 Amps

±1%

150mV pk-pk

HTIPS200-19

19Vdc

10.5 Amps

±1%

150mV pk-pk

HTIPS200-24

24Vdc

8.3 Amps

±1%

240mV pk-pk

HTIPS200-28

28Vdc

7.1 Amps

±1%

240mV pk-pk

HTIPS200-36

36Vdc

5.5 Amps

±1%

240mV pk-pk

HTIPS200-48

48Vdc

4.1 Amps

±1%

240mV pk-pk

Note: Alternate output voltages are available, consult factory for availability.

DC Output Characteristics
  • Line Regulation: ±1.0% typical
  • Load Regulation: ±0.50% typical (No load to full load; nominal input)
  • Output Ripple/Noise: 1% typical (P-P; nominal input; full load; 20MHz bandwidth)
  • Set Point Accuracy: ± 2.0% of output voltage (Nominal input; full load; 25°C)
  • Transient Response: 3% 250 uSec recovery to 1% for 25% step load range from 75% to 100%
  • Overshoot: Turn-on and turn-off overshoot should not exceed 5% over nominal voltage.

Electrical Characteristics

  • Efficiency: 91% Minimum (Measuring at 115Vac and full load)
  • Turn On Delay:1 second maximum at 115 Vac
  • Hold-Up Time: None
  • Isolation Voltage:
    • Input to Output: 3000Vrms
    • Input to Baseplate: 2500Vrms
    • Output to Baseplate: 1500Vrms
  • Isolation Resistance: 10Mohms (Output to baseplate), 25ºC ambient 70%RH
  • Temperature Regulation: ±-2.0%/ºC (±.005%/ ºC max; over operating temp range)

Protection

  • Over Current Limit: 105-140% of full load (Automatic recovery)
  • Over-Voltage Protection: 125-145% of nominal output voltage (Latching)
  • Short Circuit: Auto-Recovery after short circuit condition is removed.
  • Over temperature Protection: The power supply is protected for over temperature conditions with thermal shutdown. Auto-Recovery when temperature returns to normal.
Environmental
  • Operating Temperature: -40º to +85º C (Baseplate)
  • Storage Temperature: -40º to 100º C
  • Operating Humidity: 20% to 95% RH, Non-condensing
  • Storage Humidity: 10% to 95% RH, Non-condensing
  • Operating Altitude: Sea-level to 40,000 ft. in pressurized environment
  • Vibration: Operating: 15g-RMS, random, tri-axial vibration for 1 hr
  • Shock: Operating: 5G, half sine, 11msec, 3 axes. Non-Operating: 15G, half sine, 11msec, 3 axes.
  • Conducted EMI: EN 55022 Class B compliant (May require additional components)
  • Safety Certifications: cUL (UL60950-1/CSA60950-1),  TUV (EN60950-1) & CE (LVD)
  • Cooling: Conduction

Mechanical

  • Outline Dimensions: 1.85" X 2.4" X 4.6" (H X W X L)
  • Weight: ~6.5 oz. (185 grams)
  • I/O Connectors: Terminal pins

Optional Control and Alarms

  • Output Inhibit

Notes

  • Product specifications subject to change without notice. All rights reserved.
  • The information and specifications contained in this document are believed to be correct and accurate at the time of publication. DSC Power Solutions, Inc. accepts no responsibility for consequences arising from printing errors or inaccuracies pertaining to any use or application of this document.


About UsDesign ServicesManufacturingFeaturedContact UsHome

Product Development:AircraftCommercialDC/DCIndustrialMedicalMilitaryObsolete


Copyright 2010 DSC Power Solutions Inc. • All Rights Reserved